WEICON Zinc Spray 400 ml Cold Galvanising Corrosion Protection

PROPERTIES - WEICON Zinc Spray provides all metal surfaces with permanent cathodic corrosion protection. It forms a fast-drying, firmly adhering protective layer of fine zinc particles. DETAILS - Heat resistance: -50°C to +500°C / Dust dry after 15min / Fully cured after 24h / Abrasion resistant / Suitable for indoor and outdoor use / Colour: Light grey"matched to hot-dip galvanizing. APPLICATION AREA - WEICON Zinc Spray is suitable as primer / primer / sealant / adhesion primer / underbody protection / protective varnish for welding, drilling points / cars / gutters / fences, etc. QUALITY - 100% German Quality - The Weicon Zinc Spray exceeds the requirements of DIN EN ISO 1461 and protected metal parts treated in tests against any corrosion even after more than 1050 hours. ADDITIONAL PRODUCTS - WEICON Surface Cleaner for cleaning and grease removal before using WEICON Zinc Spray. WEICON Zinc Spray APPLICATION: WEICON Zinc Spray can be used as a high-quality rust protection primer, for example, for coating welding and drilling locations, as a conductive intermediate layer during spot welding and wherever metal must be protected against corrosion. FEATURES: WEICON Zinc Spray is TÜV-tested and provides permanent cathodic corrosion protection for all metal surfaces. It forms a fast-drying, firmly adhering protective layer of microfine zinc flakes. DETAILS: • Heat resistant: -50°C to +300°C • Dust dry after 15min • Fully hardened after 24h • Abrasion resistant • For indoor and outdoor use • Colour: RAL9006 Slightly weathered hot-dip galvanizing QUALITY: 100% German Quality - In the salt spray test according to DIN 53167 and DIN 50021, metal parts coated with WEICON Zinc Spray showed no corrosion even after more than 550 hours. The zinc flakes form a resistant protective layer even against extreme weather and environmental influences. As a result, WEICON Zinc Spray meets higher requirements than required by DIN EN ISO 1461. SURFACE PRE-TREATMENT: Clean and dry metal surfaces are a prerequisite for perfect application of WEICON Zinc Spray. WEICON Cleaner Spray S is suitable for cleaning and degreasing.